International Scientific Journal of Engineering and Management

An International Scholarly || Multidisciplinary || Open Access || Indexing in all major Database & Metadata
ISSN: 2583-6129

Impact Factor: 6.674

COMPARISON ON STUDY OF LITHIUM ION SERIES & LEAD ACID SERIES CHARGING & DISCHARGING CHARACTERISTICS

  • Version
  • Download 8
  • File Size 781.09 KB
  • File Count 1
  • Create Date 27 March 2023
  • Last Updated 8 April 2023

COMPARISON ON STUDY OF LITHIUM ION SERIES & LEAD ACID SERIES CHARGING & DISCHARGING CHARACTERISTICS

 

1MEHER KUMAR

1 Engineering College , Dayalbagh Educational Institute, Dayalbagh , Agra282005

E-MAIL: meherkumarusic@gmail.com

 

ABSTRACT:-

Lead acid batteries are strings of 2 volt cells connected in series, commonly 2, 3, 4 or 6 cells per battery. Strings of lead acid batteries, up to 48 volts and higher, may be charged in series safely and efficiently. However, as the number of batteries in series increases, so does the possibility of slight differences in capacity. These differences can result from age, storage history, temperature variations or abuse .Fully charged batteries should never be mixed with discharged batteries when charging batteries in series. The discharged batteries should be charged before connection .When a single constant voltage charger is connected across an entire high voltage string, the same current flows through all cells in the string. Depending on the characteristics of the individual batteries , some may overcharge while other remain  in a slightly undercharged condition .To minimize the effect of individual battery differences , use batteries of the same age , manufacturer , amp hour , and history and , if possible ,charge in strings of no greater than 24 or 48 volts .

On the other hand it is highly recommended to charge lithium batteries in series with a multi-bank charger. This means each battery is charged at the same time but completely independent of the other. Charging properly a lithium-ion battery requires 2 steps: Constant Current (CC) followed by Constant Voltage (CV) charging. A CC charge is first applied to bring the voltage up to the end-of-charge voltage level. One might even decide to reduce the target voltage to preserve the electrode.

Li-ion does not need to be fully charged as is the case with lead acid, nor is it desirable to do so. In fact, it is better not to fully charge because a high voltage stresses the battery. In a lithium-ion battery, overcharging can create unstable conditions inside the battery, increase pressure, and cause thermal runaway. Lithium-ion battery packs are required to have a protection circuit to prevent excessive pressure build-up and cut off the flow of ions when the temperature is too high. A partial charge and discharge will reduce stress and prolong battery life. It is recommended to avoid full cycles and stay between 100% and 50% DOD (0-50% SoC).


Download

Author's Blog

What is the difference between a Research Paper and a Review Paper?

A research paper and a review paper are both scholarly documents, but they serve different purposes and have different characteristics.research...
Read More
Author's Blog

What is DOI?

A Digital Object Identifier (DOI) is a unique alphanumeric string that is used to identify and provide a persistent link...
Read More
Author's Blog

What do you need to do during production of your Research Paper?

During the production of a research paper, the following steps need to be taken: conducting research, organizing and analyzing data,...
Read More
Author's Blog

What are the advantages of publishing a research paper?

Publishing a research paper can have many advantages for researchers, including: Career advancement, professional recognition, opportunities for collaboration, increased visibility,...
Read More
Author's Blog

Ways to Support your Academic Wellbeing which preparing the Research Paper/Article

To support your academic wellbeing while publishing a research paper, it's important to set realistic goals, manage your time effectively,...
Read More
Author's Blog

How to improve your Research Paper writing Skills?

Read extensively: One of the best ways to improve your research paper skills is to read extensively in your field...
Read More
Author's Blog

Is DOI compulsory to publish a research paper in a Journal?

DOI is not strictly required to publish a research paper, but it is highly recommended. Basically, the International Scientific Journal...
Read More
Author's Blog

In what ways does research paper give weight to career development?

Publishing a research paper can give weight to a researcher's career development in several ways, such as: establishing oneself as...
Read More
Author's Blog

How to develop a Research Paper from Scratch

Developing a research paper involves several steps including: choosing a topic, conducting background research, formulating a research question or hypothesis,...
Read More
Author's Blog

How Plagiarism report plays crucial role in Research Paper Publication?

Plagiarism is a major concern in the academic and research community, as it undermines the integrity of the research and...
Read More