SINGLE PHASE BIDIRECTIONAL INVERTER WITH MPPT’S FOR DC DISTRIBUTION APPLICATIONS
- Version
- Download 6
- File Size 393.77 KB
- File Count 1
- Create Date 28 April 2023
- Last Updated 28 April 2023
SINGLE PHASE BIDIRECTIONAL INVERTER WITH MPPT’S FOR DC DISTRIBUTION APPLICATIONS
| NEETHA H M[1] | CHANDRU M[2] | JEEVAN K[3] |
| nitha-15@pestrust.edu.in | chandrudevanga63@gmail.com | jeevanmoriya5@gmail.com |
| Asst.Prof., Dept of EEE, | Dept of EEE, | Dept of EEE, |
| PESITM, Shivamogga | PESITM, Shivamogga | PESITM, Shivamogga |
| RUDRESH C[4] | VIKAS S R[5] |
| rudreshcrudra97@gmail.com | vikyshreya363@gmail.com |
| Dept of EEE, | Dept of EEE, |
| PESITM, Shivamogga | PESITM, Shivamogga |
Abstract:
This study is focused on integration and operation of a single-phase bidirectional inverter with buck/boost maximum power point trackers (MPPTs) for dc-distribution applications. In a dc-distribution system, a bidirectional inverter is required to control the power flow between dc bus and ac grid, and to regulate the dc bus to a certain range of voltages. A droop regulation mechanism according to the inverter inductor current levels to reduce capacitor size, balance power flow, and accommodate load variation is proposed. Since the photovoltaic (PV) array voltage can vary from 0 to 12 V, especially with polycrystalline solar panel, the MPPT topology is formed with buck and boost converters to operate at the dc-bus voltage around 12V, reducing the voltage stress of its followed inverter.
Additionally, the controller can online check the input configuration of the MPPTs, equally distribute the PV-array output current to the MPPTs in parallel operation, and switch control laws to smooth out mode transition. Experimental results obtained from 2W system have verified the discussion and feasibility.
Keywords:
MPPT’S, Arduino Nano, Solar Panel, Bidirectional Inverter.
Download
