• Version
• Download 5
• File Size 319.54 KB
• File Count 1
• Create Date 28 April 2023
• Last Updated 28 April 2023

Design and Fabrication of Power Hacksaw Machine

Prof R. S. Gadakh1, Prof. P. G. Londhe2, A. S. Sonawane3,   P.R. Sonawane4,  N. R. Gogawate5,

A. J. Dhanwate6

1 Principal S.S.M.A.P. Chas Ahmednagar

2 HOD of Mechanical Department S.S.M.A.P. Chas Ahmednagar

3,4,5,6 Students of  S.S.M.A.P. Chas Ahmednagar

---------------------------------------------------------------------***---------------------------------------------------------------------

Abstract - The hacksaw machines, which are operated by human operators as for mentioned, have the demerit of required more time for cutting the work-piece. In industries these machines are used to cut the motor shafts to the required lengths. It will be difficult for the operator if he has been assigned to cut a motor shafts and he has to measure the lengths each time for cutting. Since humans are not as versatile as machines, there is a possibility that there may be inaccuracies. Besides, if there is a slight time delay in between every cycle of cutting a piece, the cumulative delay in time will be found to have a considerable magnitude, which might have been utilized properly if the proposed machine were in use there. Also pneumatic hacksaw is costly and require more maintenance. Hence by consuming electrical energy we run our project.

Key Words:  hacksaw, electrical energy etc.