• Version
• Download 44
• File Size 933.15 KB
• File Count 1
• Create Date 27 April 2024
• Last Updated 27 April 2024

DEVELOPMENT OF AUTOMATIC INDICATOR AND SAFETY DEVICE ON BIKE

SHAIK ASHRAF^*1, Y.PREM KUMAR^*2, K.ASHISH*³  , K.ANIL KUMAR*⁴ ,G.VINIL KUMAR^*5.

*1 Assistant Professor, Department of Mechanical Engineering, J.B. Institute of Engineering and

Technology, Hyderabad, Telangana

*2, * 3 ,* 4 ,* 5 B Tech Student, Department of Mechanical Engineering, J.B. Institute of Engineering and

Technology, Hyderabad, Telangana

ABSTRACT

Bikes are most preferred vehicles due to low initial cost and maintenance. the commercial utilization of bikes with the introduction of Uber, Rapido, Ola etc is increased. Indicators- whether attached at the front, side or rear of the vehicle – provide information for other road users through their signals and are thus responsible for safety on the roads to a substantial extent. Negligence in using the indicators often leads to accidents. Which can be avoided by incorporating automatic indicators and safety cut-off switch for safety on commercial bikes.

This project involves developing of automatic indicators and safety device for bikes. The automatic indicator after completing a turn switches off automatically in case the rider forgets to switch off, which results in decrease in accidents. Safety Cut – off switch can be used to alert or cut-off the power to EV motor or Engine when co-rider senses some risk from driver. Study of various types of indicators and functionalities, sensors, switches and mountings for automobiles is carried out extensively.

The integration of automatic indicators and safety devices on bikes represents a significant step forward in enhancing both the functionality and security of two-wheeled transportation. By automating indicators, riders can focus more on the road ahead, reducing the risk of accidents caused by distracted riding.

Keywords: Indicators, Controller, Battery, Sensing Element, Emergency Safety Cut Off Switch.