• Version
• Download 13
• File Size 465.36 KB
• File Count 1
• Create Date 11 April 2024
• Last Updated 11 April 2024

HEALTH MONITORING SYSTEM

Monika M. Dalvi, Snehal H. Waghmare, Bhagyashri J. Nimbai, Aiman S. Shaikh, V.D.Ghanokar

Monika Dalvi , E&TC Engineering, Zeal Polytechnic

Snehal Waghmare , E&TC Engineering, Zeal Polytechnic

Bhagyashri Nimbai , E&TC Engineering, Zeal Polytechnic

Aiman Shaikh, E&TC Engineering, Zeal Polytechnic

Prof. V.D.Ghanokar, E&TC Engineering, Zeal Polytechnic

Abstract - After people died from infections during COVID- 19 epidemic, this attracted a lot of attention. COVID-19 causes symptoms such as fever, headache, sore throat, shortness of breath, and others. Many deaths are asymptomatic, which it makes the problem even bigger. Therefore, real-time system monitoring is needed. Monitoring will be carried out about measuring body temperature and oxygen saturation in patients. Monitoring body temperature is necessary because it can detect symptoms of COVID-19 in patients earlier. Monitoring system to be built uses ESP32 , DS18B20 sensor, and MAX30100 sensor. Data communication is used in exchange of information. This system is expected to reduce number of deaths due to COVID-19. DS18B20 sensor has a sensor accuracy of 99,73% and an average error of 0,27%. MAX30100 sensor has an accuracy rate of 99,18% and an average error of 0,82%. Delay test results show an average of 155,57 ms, and packet loss test results show an average of 0%. Result of system that has been tested said the both sensors can read well.